Dyson vacuums are some of the most popular vacuum cleaners on the market, but they’re not perfect. There are a lot of common problems that users often face with these vacuum cleaners.
The top 7 problems with Dyson Vacuum are as follows:
- Dyson vacuums keep cutting out
- Keeps shutting off
- Not picking up dirt properly
- Pulsing and stopping
- Pulse on and off frequently
- The brush does not spin properly
- No suction
So, let’s take a deep dive into each of these problems and figure out how to solve them. At the end of the article, we’ll talk about some of the benefits of using a Dyson vacuum. So, without any further ado, let’s begin!
Things You Should Know About Dyson Vacuum:
A Dyson vacuum is a powerful and popular vacuum cleaner that is known for its ability to deep clean carpets and floors.
This company was founded by James Dyson and it’s a testament to outstanding innovation and cutting edge engineering.
They manufacture powerful cordless vacuum cleaners, upright vacuum cleaners, handheld vacuum cleaners, and canister vacuum cleaners. Their products are designed for cleaning your entire home.
However, like any vacuum cleaner, it is not without its problems. Some of the most common problems with Dyson vacuums include the vacuum keep cutting out, the vacuum shutting off, the vacuum pulsing and stopping, and the vacuum having no suction.
What Are The Problems With Dyson Vacuums? – 7 Common Issues
Although Dyson vacuums are some of the best on the market, you should expect some technical issues while using these cleaners.
In this section, we will take a look at some of the most common issues that people have with their Dysons. We will also provide some potential solutions for each problem.
1. Dyson Vacuum Keeps Cutting Out
If your Dyson vacuum keeps cutting out, it is most likely due to an issue with the motor. The first thing you should do is check the brushes on the motor.
If the brushes are worn out, they will need to be replaced. You can find replacement brushes online or at your local hardware store.
Solution:
If the brushes are not the problem, you may need to replace the motor. You can find replacement motors online or at your local hardware store.
Also, make sure that the vacuum is properly plugged into an outlet. If the vacuum is not plugged incorrectly, it will not work properly.
2. Keeps Shutting Off
If your Dyson vacuum keeps shutting off, it is most likely due to an issue with the thermal cut-off switch. This switch is designed to turn the vacuum off if it gets too hot.
Solution:
The first thing you should do is clean the vacuum. If the vacuum is too dirty, it will cause the thermal cut-off switch to trip.
You should also make sure that the vacuum is not being used for more than 30 minutes at a time.
If the problem persists, you may need to replace the thermal cut-off switch. You can find replacement switches online or at your local hardware store.
3. Not Picking Up Dirt
If your Dyson vacuum is not picking up dirt, there are several potential causes.
First, make sure that the vacuum is properly assembled. If the vacuum is not assembled correctly, it will not work properly.
Second, make sure that the vacuum is in the correct setting. If the vacuum is in the wrong setting, it will not pick up as much dirt.
Third, make sure that the vacuum is not clogged. If the vacuum is clogged, it will not pick up as much dirt.
Fourth, make sure that the brushroll is spinning. If the brushroll is not spinning, it will not pick up as much dirt.
Solution:
If the problem persists, you may need to replace the brushroll. You can find replacement brushrolls online or at your local hardware store.
4. Pulsing and stopping
If your Dyson vacuum is pulsing and stopping, it is most likely due to an issue with the brush bar. The brush bar is responsible for rotating the brushes. If the brush bar is broken, the brushes will not rotate properly.
Moreover, if the vacuum is too dirty, the brushes will not rotate properly.
Solution:
The first thing you should do is clean the vacuum. If the vacuum is too dirty, it will cause the brush bar to break.
As I mentioned earlier, always make sure that you are not using the vacuum cleaner for more than half an hour at a stretch.
4. Pulse on and off
One common issue people have with their Dysons is that the vacuum will pulse on and off.
This can be caused by a few different things. The first is that the dustbin may be full. To fix this, simply empty the dustbin.
Another potential cause is that the filter may be dirty. This can cause the vacuum to lose suction and start pulsing. To fix this, simply clean or replace the filter.
Solution:
Empty the dustbin. Clean or replace the filter.
5. Dyson vacuum troubleshooting brush not spinning
If your vacuum’s brush is not spinning, there are a few potential causes. The first is that the brushroll may be clogged with dirt and debris. To fix this, simply remove the brush roll and clean it off.
Another potential cause is that the drive belt may be broken or loose. This can cause the brush to stop spinning.
Solution:
Remove the brush roll and clean it off. Check the drive belt to see if it is broken or loose. If it is, replace it.
6. Brush not Spinning
One of the most common issues that people have with their Dyson vacuums is that the brush is not spinning. This can be a very frustrating issue, as it can make it difficult to clean your floors.
Here are a few potential causes for this problem:
- One possibility is that the belt that powers the brush has come loose.
- Another possibility is that the brush itself is clogged with hair or debris.
Solution:
If the brush on your Dyson is not spinning, the first thing you should do is check the belt. If the belt is loose, you can simply tighten it. If the belt is broken, you will need to replace it.
If the brush is clogged, you will need to clean it out. The best way to do this is to remove the brush head and then use a small brush to remove the debris.
7. No Suction
Another common issue that people have with their Dyson vacuums is that there is no suction.
This can be a very frustrating issue, as it can make it difficult to vacuum your floors.
Here are a few potential causes for this problem:
- The filter is dirty.
- The hose is clogged.
Solution:
If you are having issues with suction, the first thing you should do is check the filter. If the filter is dirty, you will need to clean it or replace it.
If the hose is clogged, you will need to clear the obstruction. The best way to do this is to remove the hose and then use a small brush to remove the debris.
What Are The Benefits of a Dyson Vacuum?
There are many benefits of using a Dyson vacuum. One is that they are very powerful and can clean carpets and hard floors very well.
They are also very lightweight and easy to maneuver. Additionally, Dyson vacuums often come with a variety of attachments that can be used for different cleaning tasks.
Here’s a list of some of the benefits that you can get if you decide to go for a brand new Dyson vacuum:
1. You’ll have a powerful machine that can clean your carpets and hard floors very well.
2. Dyson vacuums are very lightweight, so they’re easy to maneuver.
3. Many Dyson vacuums come with a variety of attachments, so you can use them for different cleaning tasks.
4. Dyson vacuums usually have an extended warranty, so you can get your money back if you’re not satisfied with the product.
5. Dyson vacuums are energy-efficient, so they’ll save you money on your electricity bill.
Related Questions
Why Does My Vacuum Keep Shutting off?
There could be a few reasons why your vacuum cleaner keeps shutting off. It could be because the power cord is damaged and needs to be replaced, the vacuum is overloaded and needs to be cleaned out, or there is a problem with the motor.
If the problem is with the power cord, you will need to replace it. If the problem is with the motor, you will need to take it to a vacuum repair shop.
How Do I Stop My Dyson Pulsing & Stopping?
The most likely cause of your Dyson pulsing and stopping is that the machine is not getting enough suction. There are a few things you can check to see if this is the problem:
- Check that the machine is completely or properly assembled and that there are no blockages in the hose or wand.
- Make sure the dustbin is empty and that the filter is clean.
- If your Dyson has a HEPA filter, make sure that it is properly seated and that the airways are not blocked.
If the problem persists, you may need to have your Dyson serviced by a qualified technician.
What Do You Do When Your Dyson Stops Working?
If your Dyson stops working, the first thing you should do is check for any blockages in the hose, wand, or dustbin.
If there are no blockages, then you should check the filter to see if it needs to be cleaned or replaced.
Final Thoughts
Dyson is a trusted brand in the Vacuum cleaner space, and it’s been around for some time. With the release of the new Dyson V11, the company has taken things to a whole new level.
Still, many customers do complain about a few common issues that they face while using their vacuums.
In this article, we’ve tried to address those issues and also provided some tips that should help you overcome them.
Hopefully, this article was of some help to you. If you have any questions or suggestions, feel free to leave a comment below.
